• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

240's with adapted wheels?

slow240 said:
hi im 12, what is this?

file-20.jpg
Click to expand...

What size adapter are you running in the rear? Brit's car rubs hard even with sorta rolled rears.
 
Not my car anymore, but I put these on before I sold it. 17x9 wheel is +22et with 1" spacers (adjusted -3et)

79783281-7613-465F-AAB3-38E04DFA1BB8-4206-00000418666DDF87_zpsa31009d3.jpg
 
Yeah, that wagon on 18's posted earlier in this thread is probably my favorite 245 i've seen in here. god damn beautiful. I think 17's max usually for 240's, but damn that guy pulls 18's off. can't get enough of it. haha
 
I've been trying to find a set of Corvette salad shooters for my car but there's none to be had hereabouts. The 245 on BMW 18s looks amazing.
 
My 242 with adapted BMW whells:)Only "under construction" pics unfortuantly..
18x10 ET25 with 26mm spacers in the rear:oogle:

DSC05898.jpg

DSC05936.jpg

DSC06026_zpsa425e6f6.jpg

DSC06035_zps9bd84cd5.jpg
 
Trying out the wheel adapters. I'm not sure I'm crazy about 17's on it. I may go down to 16's. Just tossed these on for yuks. The rear wheel well is such an odd shape on these cars, not many wheels look really good IMHO.


IMG_0693 by lyall4, on Flickr
 
18x8.5 et38 AC Schnitzer Type 3 Reps 5x120 with Fred's adapters 28mm in front and 32 out back.


and this is the only direct side shot I have of them(sorry for crappy cell)
 
Last edited:
center bore?

i've come across some Ford wheels locally that are intriguing, but i believe the center bores are too small. is there an easy way to address this for a 245?

for example, there's a 5x108 set with a CB of 63.4 (from what i'm told). is there any chance of these fitting without having to get them "drilled out" by a machine shop?
 
rdub315 said:
i've come across some Ford wheels locally that are intriguing, but i believe the center bores are too small. is there an easy way to address this for a 245?

for example, there's a 5x108 set with a CB of 63.4 (from what i'm told). is there any chance of these fitting without having to get them "drilled out" by a machine shop?
Click to expand...

Whats the offset on them? If you have to run a spacer, just get one that has the two different center bores.
 
You must log in or register to reply here.
Back
Top