home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Reply
 
Thread Tools Display Modes
Old 08-05-2018, 06:24 PM   #1
MisterBLC
Board Member
 
Join Date: Jun 2010
Default '96 960 Wagon w/o Nivomat - Sagging Rear End

Everyone,

Working on a '96 960 with over 200k miles on it. The car has a definite sag in the rear end, especially if the car is loaded down. My research indicates this is a Mk2 IRS car that did NOT come with Nivomats. On the chassis identification plate, the suspension is marked with an "H" and there are standard shocks on the car. The part number on the shocks don't match any volvo part number I can find so I am thinking they may be an aftermarket replacement. So questions:

1.) Is it worth trying to replace the shocks to help the rear end sag? Perhaps with "OEM" shocks, which are surprisingly reasonably priced?

2.) Is there anything that can be done if the fiberglass leaf spring is sagging? Anyone tried "shimming the mounts in some way to lift the rearend up?

Any other info and experiences from other folks would very helpful!

Thanks,
Brian
MisterBLC is offline   Reply With Quote
Old 08-05-2018, 07:07 PM   #2
Wesdunns70t5m
Board Member
 
Join Date: Oct 2016
Location: Jacksonville, NC
Default

I’ve seen it mentioned a couple times in some older threads that if the front gets worn out it’ll actually raise up some, making it appear that the rear end in sagging. Could’ve been wrong, so take it with a grain of salt
Wesdunns70t5m is offline   Reply With Quote
Old 08-06-2018, 09:04 AM   #3
lummert
Board Member
 
lummert's Avatar
 
Join Date: Jan 2008
Location: Portland IN
Default

IIRC There was a heavy duty rear spring available.
__________________
Trying to understand stupid people is like trying to pick up a turd by the clean end.
lummert is offline   Reply With Quote
Old 08-06-2018, 11:57 AM   #4
blkaplan
50 shades of beige
 
blkaplan's Avatar
 
Join Date: Jul 2002
Location: Rockville, MD
Default

You could add rear coilovers w/ assist springs to level it out. I offer them.

https://www.bneshop.com/collections/...-960-coilovers
__________________
www.BEIGEPOWER.com
Kaplhenke Racing Facebook
Quote:
Originally Posted by DarkKratoz View Post
The only safe bet is Ben.©
blkaplan is offline   Reply With Quote
Old 08-07-2018, 04:04 PM   #5
dualcitizen
Board Member
 
Join Date: Jul 2018
Location: Pays d'Érable
Default

I'm in the same situation in my 940. I just ordered new rear struts and springs, I think that should fix it. I have a solid rear axle but I ordered these for my car:

https://spareto.com/products/4295820-coil-spring

Oddly enough, ordering them from Europe was the cheapest place to get them.

OEM replacement springs aren't that costly if you want to keep it stock.
dualcitizen is offline   Reply With Quote
Old 09-04-2018, 04:34 AM   #6
Desert960
Board Member
 
Join Date: Jun 2014
Location: Tempe, AZ
Default

Hi Brian
HD Rear spring was NLA, when I went looking for one about six years ago. Volvo was re-boxing Monroe/Tenneco shocks for these cars, FYI. I found out when I did all four corners on a sedan. I believe Sachs makes a gas shock for the rear, might be worth a try.
Desert960 is offline   Reply With Quote
Old 09-04-2018, 08:42 AM   #7
VB242
Mojo Stealer
 
VB242's Avatar
 
Join Date: Sep 2011
Location: Virginia Beach
Default

Shocks won't fix a spring problem.
__________________
1980 primer JDM flares franken-242DL, 1989 silver 780 sienna rear spring nivomat delete
VB242 is offline   Reply With Quote
Old 09-10-2018, 10:36 AM   #8
hikerguy
Board Member
 
hikerguy's Avatar
 
Join Date: Dec 2012
Location: nepa
Default

Does sagging=bottoming out?
__________________
+1/2 million miles of white block sitting in the drive way
hikerguy is offline   Reply With Quote
Old 09-10-2018, 06:36 PM   #9
MisterBLC
Board Member
 
Join Date: Jun 2010
Default

No bottoming out, just noticeable when parked mainly.
MisterBLC is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 03:57 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.