home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 03-30-2021, 11:46 PM   #1
Nickagriffin
Board Member
 
Nickagriffin's Avatar
 
Join Date: Nov 2017
Location: Va
Default Steering rack swap

Hey all, I was wondering if there are any options for a steering rack swap? The steering in my 240 has always left something to be desired especially when compared to a BMW steering rack or something similar. What would I need to account for other than rack width and fitting sizes/threads?
__________________
1988 245 soon to be +T
@turbobricknick on instagram



Nickagriffin is offline   Reply With Quote
Old 03-31-2021, 12:17 AM   #2
283SD
Board Member
 
Join Date: Mar 2008
Default

Steering shaft to rack pinion size?, same distance, place?. Mounting points, how is it mounted, different mounting centers? how far away to the center of the rack to the mounts, any change in rack to frame will give you bump steer, overall width, tie rod ends.
283SD is offline   Reply With Quote
Old 03-31-2021, 10:43 AM   #3
sloopy
na
 
sloopy's Avatar
 
Join Date: May 2020
Location: Dallas, Texas
Default

Isn't someone selling quick ratio rack and pinion kits for manual racks? There's also ben's quick steer roll correctors with adjustable steering ratio. And if you have a power steering rack, there should be a way to modify the pump itself to provide less assistance which should give you better feel.
__________________
1992 volvo 240 wagon:
> flavor: black on tan
> suspension: stock + 23/19mm f/r arb
> wheels: 14x6" enkei 92 + 215/70R14
> drivetrain: M47II + 3.31 + open diff
> engine: B230F + 2.5" exhaust
sloopy is offline   Reply With Quote
Old 03-31-2021, 11:28 AM   #4
culberro
Ronald Culberbone III
 
culberro's Avatar
 
Join Date: Feb 2010
Location: Portland, OR
Default

The reason the BMWs feel better has to do with how the suspension arms are mounted.
240s have giant, soft rubber bushings from the factory and a steering shaft that has a rubber isolator in it. If you want better feel, you can add delrin or poly bushings. You can also get a solid steering shaft. Adding more caster can also help.
__________________
Cult Person. Pissing in your Kool-Aid.
culberro is offline   Reply With Quote
Old 03-31-2021, 12:12 PM   #5
redblockpowered
cone dodging dilettante
 
redblockpowered's Avatar
 
Join Date: May 2015
Location: In bed, probably
Default

Steering rack bushings probably don't help either.
__________________
1993 944 B230FT/M90 thread here: http://forums.turbobricks.com/showthread.php?t=345277
2x 1991 245 B230F/M47 (LeMons car, street car)
I sell chips for LH 2.4!
redblockpowered is offline   Reply With Quote
Old 03-31-2021, 08:15 PM   #6
Nickagriffin
Board Member
 
Nickagriffin's Avatar
 
Join Date: Nov 2017
Location: Va
Default

Ok, you guys have convinced me to just try to get the stock stuff working at 110% then. I'll start with poly bushings and go from there. Thanks!
Nickagriffin is offline   Reply With Quote
Old 04-01-2021, 04:44 PM   #7
DET17
Reformed SAABaholic
 
Join Date: Nov 2009
Location: NW Georgia
Default

There was an option to fit a very similar rack with a better ratio; I'm trying to think of the OE application.... perhaps a MERCUR?

Check some old FS thread listings and see; from memory, JohnV put one of these quick ratio racks into a 240 and the only adaptation was at the "rag joint" ..... steering shaft input.
__________________
Project "cheap thrills" build thread: http://forums.turbobricks.com/showth...67#post4211467

Feedback thread: http://forums.turbobricks.com/showthread.php?t=198746
DET17 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 07:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.