122power
dude
- Joined
- Feb 20, 2009
tonus
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
lol, well too far into this car to get discouraged about a little mishap. i bought this from work yesterday. it has a late model 4l80e and a gen 4 6.0! this project just grew up
so heres my diagnosis. i think the 5.3 wa in a vehicle that had a nasty front end collision. it cam with no balancer on it. i took the balancer off and cranked it and found the end of the crank was bent! so what im thinking is when i ran it up on higher rpms the gerotor dislodged and **** the bed completely. oh well live and learn. i took a risk with it and luckily nothing major was damaged. the 6.0 will take everything i have off the 5.3 so its no biggie. also i drove this van and i know the trans and engine work flawlessly. so thats good piece of mind!