• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

T5 trans mount (calling v8 guys)

Hank Scorpio

Chubfest 2009 Survivor
300+ Club
Hey... I think it was Greg that had some pictures of how to modify the crossmemeber for a T5 right? Basicly a piece of flat stock drilled to connect the mount to the crossmember right?

Hopefully with some luck, get the T5 bolted up and in the car this weekend :D

Doug
 
I think I've still got pictures from Jason Z's 5.0 swap with a modified trans x-member. I'll look tomorrow and post 'em if I got 'em.
 
Jeez Doug, why don't you check in the T5 thread :)

t_mount.gif
 
Hey Doug, in case you still want to see mine, here it is. You can see that my tranny must be farther forward than Jason's, he really made an effort to get the Ford engine in as low and far back as possible. On mine, there are actually no modifications to the crossmember, the plate is just bolted on, and has an angle in it to bolt to the crossmember.

I am curious to find out what the final position of the tranny is once you get it mated up to the engine.

Greg

Dsc00026a.jpg
 
Back
Top