LeedomtoFreedom
New member
- Joined
- Oct 11, 2017
- Location
- Ingleside
So I'm swapping diffs from both of my 240s, one with mechanical speedo, one with electronic.
The G80 I'm using into the car with electronic speedo has the 48 tooth but need the 12 tooth tone ring. Going through a couple threads and being extremely clever, I've realized that I need to cut some of those teeth out, but I was curious if there's anything to be mindful of.
If I grind down the unnecessary teeth, does the depth matter? I don't need to shim the sensor or anything.
cutting 2 out of 3 teeth. correct?
Really enjoying the electronic speedo, trying not to ruin it.
The G80 I'm using into the car with electronic speedo has the 48 tooth but need the 12 tooth tone ring. Going through a couple threads and being extremely clever, I've realized that I need to cut some of those teeth out, but I was curious if there's anything to be mindful of.
If I grind down the unnecessary teeth, does the depth matter? I don't need to shim the sensor or anything.
cutting 2 out of 3 teeth. correct?
Really enjoying the electronic speedo, trying not to ruin it.