• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

940 Wilwood wheel clearance

K

kingfisher

New member
Joined
Jun 1, 2011
Location
St. Pete, FL
Does anyone run Wilwoods front kit on their 7/940? What wheels are you using if so? Ready to take the plunge at this very moment.

17s with spacers perhaps? Eiker Polaris reps?

Thanks!
 
Depends on what setup, what rotor size, etc.

I have Superlite's with S60R rotors, minimum wheel size is 17", plus you need enough clearance from the spokes to the caliper, so you will need a spacer. I'm running 17x8 ET53's with 35mm adapters, no clearance issues at all.
 
I have the wilwod kit on my car that was the kit onat but most 17's should clear it. IIRC my style t but most 17's should clear it. IIRC my style 5's that were redrilled need like a 5-10mm spacer to clear.
 
You must log in or register to reply here.
Back
Top