home register FAQ memberlist calendar

Go Back   Turbobricks Forums > General > article composition

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-10-2018, 05:34 AM   #16
Venlonaer
Board Member
 
Venlonaer's Avatar
 
Join Date: Dec 2014
Location: The Netherlands
Default

Quote:
Originally Posted by Mbeas96 View Post
I'm very close to going thru with the wasted spark install. I have the bosch 2x2 coil and miata power stage, im a few days away from ordering the wasted spark board.

A few questions first,
I deleted my last post on here because I see it was answered earlier, but just to be sure...
Using a gold chippable ezk with a custom chip installed should not have any adverse effects, correct? I have access to a ezk that does not have the daughter chip, but I would like to keep the option to adjust/have other people adjust my ezk tune.

Plus, while helping with my brothers install, he used 18 gauge IIRC (tho it might have been 16) on the board to ezk connections and it would of been a lot easier if we went with a smaller wire. These are just signal wires right? So what's the smallest wire one could use, like 22 gauge?

Then, wires that go from the wasted spark board to the power stage and from power stage to coil? I would guess bigger gauge for those, but I'm no expert in wires.

Any help is appreciated!
I used 20 awg, it's perfect. I also used 20 awg for the rest
Venlonaer is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 12:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.