thinner 360 mounts?

So I'm having interfearence with my 360glt engine mounts with the aq171's oil cooler (that I don't want to give up). Does anyone know of an option for a more narrow one, or if these can be cut down to size?

<img src="https://pbs.twimg.com/media/DqvHBrTUwAIVU_O.jpg" height="50%" width="50%">

here's the part in question

<img src="https://pbs.twimg.com/media/DqvF8CZU8AA_9Te.jpg" height="20%" width="20%">

alternatively is a shorter oil filter a bad idea? (I'm assuming it is, especially since I'll be drifting)

You can not cut the 360 mounts as they are oil filled. But here you go https://www.classicswede.co.uk/360_PU_engine_mount/p1733344_15676659.aspx

that would have been great, but he made a really good idea for adapting 740 engine mounts, and I might do that instead thanks for the link man. (they are sold out, but that's fine, I've always wanted to make engine mounts)

*edit haha I didn't realise that it was you, you've got some good ideas there

You can just use a smaller oil filter (OC 606). I know some people (including myself) who did that.

is that compared to the standard filter, or compared to the already short filter of the aq one that has the cooler?

Oh I wasnt aware of the already shorter filter... The OC 606 is 76mm in diameter... about the same in height (I cant measure it right now).