snappymike
Member
- Joined
- Mar 31, 2016
- Location
- North Carolina
Car is a '91 740 Turbo.
Turbo was shot when I bought the car, replaced with a reclocked 15g.
Now, if I accelerate at 60-100% throttle and abruptly release the throttle, the car stalls. It does not matter if it's for 2 seconds from a stop and boost is 0 or if it is a 5 second pull on an on-ramp, the result is the same. It restarts normally after it stalls. It drives fine as long as I slowly raise the gas pedal after accelerating, I accelerate slowly, and I have no abrupt gas-->brake action.
Thoughts?
Turbo was shot when I bought the car, replaced with a reclocked 15g.
Now, if I accelerate at 60-100% throttle and abruptly release the throttle, the car stalls. It does not matter if it's for 2 seconds from a stop and boost is 0 or if it is a 5 second pull on an on-ramp, the result is the same. It restarts normally after it stalls. It drives fine as long as I slowly raise the gas pedal after accelerating, I accelerate slowly, and I have no abrupt gas-->brake action.
Thoughts?
Last edited: