- Joined
- Dec 23, 2006
- Location
- Rushing Lane, Scappoose, OR
Yesterdays wrenching.
IPD front strut rod poly bushings. Front 25mm IPD sway bar. Lower IPD chassis brace. Upper IPD, cherry turbo chassis brace. Front camber mod, tapped out front stud on each side and moved over as far as it would go then re-drilled hole for stud. Then set toe in to 1/16 inch toe in with tape measure.
Still gotta take that plastic cover off the rear way back kids seat belt so I can take that belt out. I ditched the way way back kids seat thing.
IPD front strut rod poly bushings. Front 25mm IPD sway bar. Lower IPD chassis brace. Upper IPD, cherry turbo chassis brace. Front camber mod, tapped out front stud on each side and moved over as far as it would go then re-drilled hole for stud. Then set toe in to 1/16 inch toe in with tape measure.
Still gotta take that plastic cover off the rear way back kids seat belt so I can take that belt out. I ditched the way way back kids seat thing.