LeedomtoFreedom
New member
- Joined
- Oct 11, 2017
- Location
- Ingleside
This is for a 530 head, trying to get larger valves for my machinist to put in.
Been blowing dust off old threads and found KLracing to be a good source, I was just curious what else is out there.
Also not sure what valve sizes I'll use, probably the maximum it'll fit without issues.
Also a lot of aftermarket valves are stainless steel, where the stock valves are sodium filled. Is this going to be an issue with b0ost?
Been blowing dust off old threads and found KLracing to be a good source, I was just curious what else is out there.
Also not sure what valve sizes I'll use, probably the maximum it'll fit without issues.
Also a lot of aftermarket valves are stainless steel, where the stock valves are sodium filled. Is this going to be an issue with b0ost?