scandic960
New member
- Joined
- Nov 24, 2016
- Location
- Finland
So couple of years ago i bought an 960 with a broken B204FT in it. Allmost all bearings were wore out and the crankshaft was so bad i had to replace them all.
So began the engine rebuilt.
So the engine got all new bearings and an H-profile rods. Holset HX35 with supers compressor and a modified china manifold to the exhaust side. 70mm throttle body and 870cc injectors to the intake side.
Also made the oilfilters holder to be located to the front of the car with AN-fittings and steelpraided hose.
Engine managment also changed to megasquirt with audi cop coils.
For cooling i got an mishimoto aluminum radiator from gt celica
More to come..
So began the engine rebuilt.
So the engine got all new bearings and an H-profile rods. Holset HX35 with supers compressor and a modified china manifold to the exhaust side. 70mm throttle body and 870cc injectors to the intake side.
Also made the oilfilters holder to be located to the front of the car with AN-fittings and steelpraided hose.
Engine managment also changed to megasquirt with audi cop coils.
For cooling i got an mishimoto aluminum radiator from gt celica
More to come..