swedish-rocket
Member
- Joined
- Mar 20, 2006
- Location
- Cincinnati Ohio
What Intank fuel pumps people have converted to on E85 to handle 400whp plus?
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
Walbro 450 lbh from amazonracing
Crazy amount of flow!! What gauge wire are you running to your additional fuel pump relay to this?
Just swapped my 255 walbro to a 320 AEM, ran #10 to the relay from the battery, #12 from the relay to the pump. The 320 is spec'd at 15A full tilt.
I have a dw301 in my s10 and a AEM 320 going into my 244. Kjet main pump is quitting on me at 26psi on e85
Are you going to bypass the main pump?
I was running a walbro 255 and around 380whp on E85 through a 1/8" barb on fuel pump on a 04 srt4.Before a return on those cars you can push 420whp E85 through the stock system by replacing the barb with 5/16 hose. I'm not sure how much horsepower your pushing but a Intank 320lph is probably plenty.
Just swapped my 255 walbro to a 320 AEM, ran #10 to the relay from the battery, #12 from the relay to the pump. The 320 is spec'd at 15A full tilt.