poppatwist
New member
- Joined
- Feb 21, 2018
- Location
- MA
Hey fellas, I've been gathering up some parts for a while for a +T build on my 92 240GL, all the while replacing OEM stuff for stage 0 here and there. Since none of my buddies have experience with old bricks I wanted to run my parts list here to see what people recommend I get before tearing her apart.
Here's what I've got so far:
- B230FT manifold
- Intercooler and piping from a 760 turbo wagon
- TD04HL13T turbo (fits on the manifold fine, exhaust side needs a custom downpipe)
- jetronic ECU from a 740 turbo
- MAF sensor from the 760 turbo wagon
- Oil pan with an oil bung welded in (done well by an exhaust shop)
- Cooling hard lines for the turbo (the banjo fitting ones)
Other than oil lines, fittings, gaskets, and vacuum lines, what else am I missing or what would you recommend I need on top of all this? Will the parts I got get along okay? The engine and tranny (aw70) have around 140k on them and the only major thing left for stage 0 is fuel pumps and filters. I'm not looking to build a sub 9 second car or anything, just want to liven her up a bit. I'm not expecting to go above 200 horses for now, just want to get it running. Thanks in advance
Here's what I've got so far:
- B230FT manifold
- Intercooler and piping from a 760 turbo wagon
- TD04HL13T turbo (fits on the manifold fine, exhaust side needs a custom downpipe)
- jetronic ECU from a 740 turbo
- MAF sensor from the 760 turbo wagon
- Oil pan with an oil bung welded in (done well by an exhaust shop)
- Cooling hard lines for the turbo (the banjo fitting ones)
Other than oil lines, fittings, gaskets, and vacuum lines, what else am I missing or what would you recommend I need on top of all this? Will the parts I got get along okay? The engine and tranny (aw70) have around 140k on them and the only major thing left for stage 0 is fuel pumps and filters. I'm not looking to build a sub 9 second car or anything, just want to liven her up a bit. I'm not expecting to go above 200 horses for now, just want to get it running. Thanks in advance