• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

740 Drivers window wind noise at rear edge

T

tintintin

Member
Joined
Sep 11, 2012
1985 745. Drivers window must be a slight gap at rear edge. It appears all the way closed but allows cold air in and wind noise at the rear edge. Weatherstripping and channel appear intact.

Is there adjustment for this? Or is it worn/bent parts?

Somehow I think this may be a common problem but have not found anything in my searches, Thanks!
 
Not likely loose in my opinion..... buy a replacement mechanism X linkage to remove the 30 years of wear on that window mechanism. My 92 745T had the same issue..... replacement window actuation mechanism resolved and all is quiet not. Amazon @ around $135 shipped to your door.
 
Where on the linkage did you see the wear? I want to visually verify before buying replacement parts.
 
Try that when window is rolled up put your hands on both sides of the glass and pull straight back if it moves and the wind noise stops the regulator is worn out
 
You must log in or register to reply here.
Back
Top