r3ckl1ss
Member
- Joined
- Apr 3, 2005
- Location
- san diego california
Hi all, will a set of konig intentions fit my 1984 240 with IPd 25 mm spacers.the konig intention dimensions are 17x8,5x108,45mm offset ,hub bore 73.1
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
You still need the hubcentric rings for the wheels to match the IPD spacers. They're 65.1mm. You'll need 73.1 to 65.1 hubcentric rings . They have them all over the interwebs for ~$10-$20.
You will need spacers and center bore rings to match the 65.1mm center bore of the 240.
Yea if you don't know how to tighten a lug nut
Really?�� I thought 225 were to wide for a 240 even on 16's,I don't know for fact,but I've always heard they were to wide for the fender well and correct me if I. Wrong but they will fit in the rear but not the front,(if I'm remembering this right they'll rub the strut tower).