LeedomtoFreedom
New member
- Joined
- Oct 11, 2017
- Location
- Ingleside
Finally getting around to putting an engine in one of my 240s in hope to sell it before I go to ISU soon. Bought the engine from a guy and he included the wiring harness which I plan to use. Haven't done a swap in a short minute so a few of these connectors are unknown. Engine's an 87 so 2.2
This guy's next to the ign coil, shares same wire colors as leads on the coil
https://ibb.co/XYvjkRL
This guy would be inside the cabin footwell. Red, yellow and white wires so I'm guessing power in or out.
https://ibb.co/T4HnjmH
Gonna look at some diagrams, just thought someone might know off the top of their head.
This guy's next to the ign coil, shares same wire colors as leads on the coil
https://ibb.co/XYvjkRL
This guy would be inside the cabin footwell. Red, yellow and white wires so I'm guessing power in or out.
https://ibb.co/T4HnjmH
Gonna look at some diagrams, just thought someone might know off the top of their head.
Last edited: