S/V/C '98 V70 - removing rear quarter trim and glass

Hi,

Has anyone here removed the rear quarter panel glass from a P80 V70? If so, I'm mostly curious on how to remove the trim from the outside. How is the glass kept in place? Does it use a butyl seal that I'll need to slice with some piano wire?

I haven't removed the glass or the seal but the metal trim is held in by 2 or 3 Torx screws at the B-pillar. Remove them and gently slide it forward; it bends easily so take your time.

kampman said:

I haven't removed the glass or the seal but the metal trim is held in by 2 or 3 Torx screws at the B-pillar. Remove them and gently slide it forward; it bends easily so take your time.

Click to expand...

Cheers - if I can get that trim out of the way I'm sure I can get the glass out, however it's held in.