jamesinc
WD-40 Enthusiast
- Joined
- Dec 28, 2010
- Location
- Sydney, Australia
I can't seem to find this on any of the wiring diagrams I've come across online. I'm retrofitting a cruise module from a 1991 US-spec 240. I don't have the corresponding 8-pin connector on my main harness, so I need to pin it out by hand. It is an LH-2.4 car however, so I have the speed signal and all that.
Anyway, does anyone have a wiring diagram that actually shows the pinout of that plug? It seems to be absent from all the greenbooks I've found. Alternatively, does anyone have a full schematic of the main harness in a 91+ 240? I should be able to work out the correct pinout from that.
Anyway, does anyone have a wiring diagram that actually shows the pinout of that plug? It seems to be absent from all the greenbooks I've found. Alternatively, does anyone have a full schematic of the main harness in a 91+ 240? I should be able to work out the correct pinout from that.