Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
I broke down & just ordered some vinyl tubing from Dave Barton. I have the new D-Jet plugs & boots from Hi Performance (Eric & Ian), so I'll just redo the harness.
Scope creep.....
Focus on cleaning up the clips, brackets, and front wheel wells tonight, then get the crossmember reinstalled tomorrow night.
Transmission rebuild. Ordering new synchros & the locking rings from Hi Performance. Need to remove the output cover so I can finish the disassembly, but decided to clean & repaint the gearbox case. It was noisy & leaked, but functioned fine. Need to clean some of the paint that dripped thru the selector rod holes. Oops!
All of the gears look good, figured will it's apart the synchos are cheap enough, and the retainer springs sound like wear items so I change them also. I need to call Hi Performance Monday to pay them.