Ezk 117 Bijlsma

219 goldbox Bijlsma

Does somebody know how to connect a bijlsma wasted spark board to a 219 goldbox?
This board looks different than the bucka boards.
I've searched through the entire wasted sparks topic's.
I can't any info about it.
Mister Bijlsma hasn't replyed yet.
I need my car tomorrow to drive.

http://i27.photobucket.com/albums/c...K Mod/BuchkaWastedSparkWiring_zpsrvmmbglw.jpg

PSU=ground, take from the same spot as the Bucka one
+=5v, take from the same spot as the Bucka one
The 5 pin header with coil 1 to 4 and ezk: 1=coil 1/4. 2=coil 2/3. EZK=spark output
inputs: use VR on the same spot as VR for the Bucka board.


That is from some looking and from what I remember (installed a few of them). So be careful and think for yourself, I can't guarantee this is correct, though I am pretty sure it is!
Both variants (Buchka/Bijlsma) do exactly the same, just in a slightly different way. Need the same inputs/outputs.

Maybe someone can confirm this pinout!

The bijlsma board is very different

Drop me an email and I can send you the instrustions

yes i know. I used and installed both.

If you look at it as a black box (signals in, black box does something magic, signals out) it is not different.

classicswede said:

Drop me an email and I can send you the instrustions

Click to expand...

See private message .

Thanks .

should be problem solved