home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 11-25-2017, 02:01 PM   #1
Wagonoff240
Newbie
 
Join Date: Oct 2016
Location: Sasquatch land, OR
Default 850 turbo fpr on b230f+t

Alright guys Iíve searched a little and havenít found a direct answer. Iím almost done with my stage 0 +t and am trying to tie up all the loose ends. I scored a full set of 5 850 turbo injectors on the fuel rail with a Bosch 3.0 bar fpr (pn:0280160746) that looks new... jy said car had 160k when parts where pulled. My question is, should I use this fpr in place of my stock n/a one or even the questionable (probably ac delco) turbo donor fpr?
Car is: 1989 245 aw70 and donor is a 91 740turbo lh2.4 aw71
Oh and the 850 was a 93? Canít quite remember and not sure it matters...
Wagonoff240 is offline   Reply With Quote
Old 11-25-2017, 02:30 PM   #2
okoye
Board Member
 
okoye's Avatar
 
Join Date: Jul 2009
Location: west hartford, ct
Default

93 wasn't a turbo year for 850's. And use the fpr from a turbo rwd volvo as they're 3 bar vs NA 2.5 Bar
__________________
1991 Volvo 940se sedan m90 swapped, 17x10 oz fittistars, Bilsteins.
1994 Volvo 960 turbo b204ft m46

Quote:
Originally Posted by vagabond View Post
no one saw me with my little umbrella and sandpaper though.
okoye is offline   Reply With Quote
Old 11-25-2017, 02:43 PM   #3
Wagonoff240
Newbie
 
Join Date: Oct 2016
Location: Sasquatch land, OR
Default

Thanks, I know the 850 was turbo b/c I am avoiding the resistor pack... just couldnít remember the year. I will definitely use the turbo fpr then. Iím ready for this to be done...
Wagonoff240 is offline   Reply With Quote
Old 11-25-2017, 04:20 PM   #4
okoye
Board Member
 
okoye's Avatar
 
Join Date: Jul 2009
Location: west hartford, ct
Default

None of the 850's used a resistor pack for their injectors.
okoye is offline   Reply With Quote
Old 11-25-2017, 04:53 PM   #5
lummert
Board Member
 
lummert's Avatar
 
Join Date: Jan 2008
Location: Portland IN
Default

From what little I could find the 0 280 160 746 is rated at 44.2 psi.
__________________
Trying to understand stupid people is like trying to pick up a turd by the clean end.
lummert is offline   Reply With Quote
Old 11-26-2017, 08:27 AM   #6
K9 240
Board Member
 
K9 240's Avatar
 
Join Date: Jun 2013
Location: Midlands UK
Default

The fpr has the bar pressure stamped on the side. When I wanted a 2.5 fpr to try with some larger injectors, I spent months looking through the junk in my garage for the n/a fuel rail I had taken off when going +T - not pleased to find it was 3 bar also. This was a uk spec '93 wagon, but I wouldn't make assumptions based on turbo or n/a alone.
K9 240 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 11:02 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.