LH2.4 B230F+T PCV issue with TOO much oil!

G'day,

My +T is taking on a fair bit of oil through the intake via the PCV which I believe is due to a fair bit of blow by.

I've looked into doing a catch can set up, but I'm concerned that will just fill up relatively quickly.. is there another way I can go about this with out sucking oil through my turbo?

Cheers,
Sam

Why don't you have the catch can drain back into the oil pan?

Here is a pretty standard way of doing it:

https://www.240turbo.com/catchcan.html

Yelp do what the link says. I have no problems after doing that mod. Engine had 280000 miles on it and running 20lbs boost. Before I had same problem as you.