home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Reply
 
Thread Tools Display Modes
Old 12-23-2018, 10:23 PM   #1
taylor84240harris
Board Member
 
Join Date: Oct 2013
Default 91 240 hard start and high idle help

Been having several issues with my 91 240 n/a auto that have slowly been getting worse. It has to crank for nearly 5 Seconds before it will start, Once it's warm it hunts for an idle and if it does settle on an idle its hi, around 1500- 1700 rpm. No codes currently and I've replaced throttle position sensor and idle air control valve, and crank pos sensor. I've also checked for vacuum leaks with none found. It does have an EGR and it seems to be working properly.
taylor84240harris is offline   Reply With Quote
Old 12-24-2018, 03:49 PM   #2
dl242gt
300+hp on the shelf club
 
dl242gt's Avatar
 
Join Date: Jun 2002
Location: S NJ, a suburb of Phila.
Default

When you replaced the throttle switch did you make sure the adjustment is correct? How are the spark plugs? Is the gap correct? If you are using copper spark plugs that are more than a year old and the gas in your area has alcohol in it. Your spark plugs are bad. Make sure you set the gap on any new plug you use. .028" is what to adjust to. Make sure plug wires are in spec and cap and rotor are in good condition, too. Watch out for the coil wire shorting out.

How is the battery charge? I would check connections in the ignition system like the coil and the ignition amplifier near the battery. A high idle for a few minutes after starting is normal if it is very cold. Then it should go down to normal after a few minutes.

Last edited by dl242gt; 12-24-2018 at 03:50 PM.. Reason: add comment.
dl242gt is offline   Reply With Quote
Old 12-25-2018, 01:13 AM   #3
84B23F
Board Member
 
84B23F's Avatar
 
Join Date: Feb 2008
Location: Kansas, USA
Default

Quote:
Originally Posted by taylor84240harris View Post
crank for nearly 5 Seconds before it will start...Once it's warm it hunts for an idle... checked for vacuum leaks.
Manually, engage fuel pumps at fuse panel, then crank...or switch ignition on...wait for pumps to prime, then engaged starter. Firstly, fill up fuel tank first.

Unplug brake booster's vacuum line, and plug hole on intake.

High idle suggests air coming into intake...throttle plate out of adjustment? Must be set to OEM specs...no iffs, buts, or ands.
84B23F is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 09:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.