|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
06-15-2019, 08:12 AM
|
#1 |
|
Board Member
Join Date: May 2011
Location: Halesowen
|
G80 axle oil
Struggling to find a definite answer here.
What oil should I use in a G80/1041 locker? I keep seeing references to Redline GL5 75/90, but the only i keep finding says on the bottle "for LSD" which I'm told isn't good for the G80? https://www.eurocarparts.com/ecp/p/c...gaAlz_EALw_wcB
__________________
1990 Volvo 765 D24Tic ZF22. Monark 273 nozzles 163 bar, standard turbo @ 16psi, factory IC, reground LDA pin, more fuel. Running 90/10 WVO/petrol. 
|
|
|
|
06-15-2019, 08:59 PM
|
#2 |
|
Dejected by Volvo
Join Date: Nov 2002
Location: North of Dallas
|
I used this last time from O'Reilly:
Masterpro synthetic 75w90 GL5 made for conventional diffs. https://www.oreillyauto.com/detail/b.../80054/4495696
__________________
 '84 242ti, fourth owner, mine since 2003. Always garaged since brand new. Old-school rounds because I like. B21FT, SDS EFI/IGN, TD04HL-15G, T5Z trans with 0.73 OD, hydro clutch, 3.91 diff with unmodified G80. Volvo Ambivalence of Volvo Enthusiast Community: prancingmoose.com/#novolvo Dave's Volvo Page: davebarton.com 240 Mods and Fixes Pages: 240turbo.com/volvo240mods.html |
|
|
|
|
06-16-2019, 04:31 PM
|
#3 |
|
Board Member
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
|
Yeah regular GL5 no LSD additives or it won't lock..
__________________
1988 245 White slicktop M47 Wagon! 93 b230f. LH 2.4 STS flat flywheel. 1990 745 B230FT Getrag JohnV flywheel 240mm clutch 13c A-cam 3.54 G80 548K 1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's. 3.73 G80 M90 to put in. 1995 940 White racing wagoon. 13c m90 to put in 
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
