• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Stiffest spring for Koni yellows?

On a 240?

400lb is bouncy. Bad.

350 is better. Still bad.

300 is acceptable. Still underdamped.

I have some 275s to try, but I'm thinking 250 is the high end.

And I removed your sig pic. Also bad.
 
I have 300* springs on the front of my 240 running koni yellows. 200* springs on the rears with koni yellows. I like it so far and it was a super improvement over the squishy soft stock springs.
 
i use some ~200lbs springs used for rally cars in volvo VOC
95087315.jpg


that together with revalved and shortened yellows .. works like a charm
 
M.H.Yount's suspension redux thread states (I think) he runs 275# front 10" springs, with stock KONI Yellow sports. He likes it.

Many "lowered suspension" comments here about KONI sports failing when lowered ride heights are operated. Search the KONI threads, and ye shall find many an opinion......
 
The konis are hydraulic, i have them on some cut springs now without any problems but I have no idea of the spring rate and they're a little bouncy and I would like it little more controlled.
 
You must log in or register to reply here.
Back
Top