Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Hello Guest, welcome to the initial stages of our new platform! You can find some additional information about where we are in the process of migrating the board and setting up our new software here
I found two bulbs at the front of the radio but there doesn't seem to be an easy way to remove them. I found a post on MVS here but the user there had to solder. Is there an easier way and, if so, (a) how and (b) what bulbs are used?
Here ya go (see below). The bulbs can be found on either side of the display. They don't appear to be able to be pulled straight out and I don't want to risk yanking on them only to break the connection with the board. The bulbs go into a plastic housing that has turns down at a 90 deg angle toward the board. The bulbs had little blue plastic covers (presumably to blend with the yellow bulbs to make a green value?) but I don't plan on putting them back.
Hard to tell from the photos but it does look kinda like further disassembly and soldering might be required.
In my personal experience, Volvo's dash bulbs tend to be neo-wedge t3, t4, t4-t4.7 or t5 size. If RadioShack were still around, I'd suggest taking the bulb there to find a match.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.