home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > projects & restorations

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-08-2020, 01:24 AM   #18
Finnish240
Board Member
 
Finnish240's Avatar
 
Join Date: May 2011
Location: Finland
Default

New battery, fuel- and oil filter with fresh oil are in. Car starts like it should and works fine. Fuel filter change was such a pain in the ass because banjo fittings started to leak, and leak wouldn't stop until I did put old copper rings back. New copper rings from my 50 piece sortment were too wide from touching surface. Next task was to install new wideband Bosch lsu 4.9 sensor. Old sensor stopped working last fall and Innovate showed only E8 fault code. Some times 22.4 was shown but it couldn't read any afr's right. Common issue with Innovate mtx-l.

Works and shows afr's how it should
__________________
Volvo 240 GL - not so low, but yes.... it is slow
Finnish240 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 11:59 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.