home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > projects & restorations

Reply
 
Thread Tools Display Modes
Old 04-04-2020, 04:17 PM   #1
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default Deb the 940



Picked it up for 950, needs a couple maintenance things but not much

Cant wait to start with the mods, but maintenance first, the boring ****
Wilford Brimley is offline   Reply With Quote
Old 04-04-2020, 07:49 PM   #2
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

Got a water pump(it needs it) took out the ic started removing the turbo, ordering a new ic and turbo, and piping for the 3" amm right now

Wilford Brimley is offline   Reply With Quote
Old 04-04-2020, 07:51 PM   #3
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

Wilford Brimley is offline   Reply With Quote
Old 04-05-2020, 12:06 AM   #4
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

Throwing around the idea of hood/fender exit for exhaust, dont mind loud, my jeep was a 5.2 with open exhaust....very loud, thoughts?
Wilford Brimley is offline   Reply With Quote
Old 04-05-2020, 04:48 AM   #5
Martin L.
Kombinationskraftwagen
 
Martin L.'s Avatar
 
Join Date: Jan 2012
Location: München
Default

Loud is one thing, the broken garden tractor sound another.
__________________
IDKFA
Martin L. is offline   Reply With Quote
Old 04-05-2020, 01:27 PM   #6
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

Good point
Wilford Brimley is offline   Reply With Quote
Old 04-06-2020, 08:43 PM   #7
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

Had to finish wiring up my cams today but got a little time in.





got some recycling
Wilford Brimley is offline   Reply With Quote
Old 04-07-2020, 11:28 PM   #8
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

Didnt get too far today, put together my new couch. Got the mani and turbo off though.


Last edited by Wilford Brimley; 04-08-2020 at 02:46 AM..
Wilford Brimley is offline   Reply With Quote
Old 04-07-2020, 11:29 PM   #9
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default



The good 13c is for sale if anyone wants it
Wilford Brimley is offline   Reply With Quote
Old 04-07-2020, 11:33 PM   #10
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

image upload and copy directlink

Gotta keep an eye on my love!
Wilford Brimley is offline   Reply With Quote
Old 04-08-2020, 05:21 PM   #11
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default



Got the new water pump on, no the amm is not going there
Wilford Brimley is offline   Reply With Quote
Old 04-09-2020, 06:39 PM   #12
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

free picture upload forgot how much this needed to be opened up




Well the 13c sure is cute!

I'm currently clocking the turbo whilst sitting at my kitchen table drinking wine

Last edited by Wilford Brimley; 04-09-2020 at 08:04 PM..
Wilford Brimley is offline   Reply With Quote
Old 04-09-2020, 08:51 PM   #13
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

got it clocked now just need the feed and drain which should be here tomo
Wilford Brimley is offline   Reply With Quote
Old 04-09-2020, 09:00 PM   #14
sbabbs
Board Member
 
sbabbs's Avatar
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default

I'd swap to the bigger water pump pulley so you'd have less water pressure at higher racing rpm.
__________________
1988 245 White slicktop M47 Wagon! 93 b230f. LH 2.4 STS flat flywheel.
1990 745 B230FT Getrag JohnV flywheel 240mm clutch 13c A-cam 3.54 G80 548K
1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's. 3.73 G80 M90 to put in.
1995 940 White racing wagoon. 13c m90 to put in
sbabbs is offline   Reply With Quote
Old 04-11-2020, 09:44 PM   #15
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

Got my shower redcoated....that was fun but I did get the ac out and got the intercooler put in and cold side piping figured out. Have the turbo in place to try to figure out intake and hotside piping. Have an MBC and downpipe on the way. Also got the gauge pod in and screwing with wiring, weee!


free image upload

Wilford Brimley is offline   Reply With Quote
Old 04-17-2020, 10:24 PM   #16
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default


Anyone remember which size bolts hold these on? Also the 0g and 4g wiring is for my beats
Wilford Brimley is offline   Reply With Quote
Old 04-17-2020, 10:27 PM   #17
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

Also trying to figure out the an of this kinguawa(or whatever it is) feed is for the m14x1.5-?an adapter. The one on the turbo is -4an...no idea what the other side is



3" dp on the way...still, also got a nice mbc. It's making headway!

Last edited by Wilford Brimley; 04-22-2020 at 09:08 PM..
Wilford Brimley is offline   Reply With Quote
Old 05-03-2020, 10:50 PM   #18
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

got to play a little today. Got the turbo on, oil feed on, drain is done, oil pressure sender on, mbc on and mounted, oil cooler arm back on welded a vband onto 3" dp, and of course some paint
Wilford Brimley is offline   Reply With Quote
Old 05-03-2020, 10:52 PM   #19
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

Wilford Brimley is offline   Reply With Quote
Old 05-04-2020, 01:28 AM   #20
Sjeng
Board Member
 
Sjeng's Avatar
 
Join Date: Sep 2017
Default

I like it. Automatic transmission? It will certainly crush some souls when done.
Sjeng is online now   Reply With Quote
Old 05-04-2020, 01:25 PM   #21
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

Yeah its autotragic, gonna get the accum mod though. Looking for a turbo cam/gear now
Wilford Brimley is offline   Reply With Quote
Old 05-04-2020, 01:43 PM   #22
ZVOLV
<Master Tech>
 
ZVOLV's Avatar
 
Join Date: Nov 2002
Location: California
Default

That poor old head gasket is gonna pop
__________________
No Start Thread
ZVOLV is online now   Reply With Quote
Old 05-04-2020, 08:58 PM   #23
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

Yeah it's ok, easy fix as we all know
Wilford Brimley is offline   Reply With Quote
Old 05-04-2020, 08:59 PM   #24
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

Already ready to blow that hg;)

Wilford Brimley is offline   Reply With Quote
Old 05-04-2020, 09:16 PM   #25
Wilford Brimley
Is posting from the grave
 
Wilford Brimley's Avatar
 
Join Date: Jun 2008
Location: Marysville, wa
Default

I am considering getting an extra hg and blots for when it does happen. I fully expect it....ill have a wideband and what not but eh, it's an old gasket
Wilford Brimley is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 03:52 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.