home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-18-2017, 06:15 PM   #1
Join Date: May 2017
Location: Luleň, Sweden
Default AW30-40/3 to 2003 v70 d5 engine...


To make a quite long story as short as possible, I'm installing a 163hp D5 engine in a Nissan D21 4x4 and have had some problem(to say it mildly) to find a gearbox with top gear around 0.7:1.
The M90H2/L2 would be great, but is more than scarce to find.
However, I realized that the autos has similar final gear.
But now to the question: any problems electrical wise to match either a AW30-40 or 43 to a 2003 D5, and would one or the other be easier?

And a second question, I noticed that the back piece of the housing is detachable.
What's behind it?
I'm installing a np242 transfer case to it, and was thinking if it's just a housing for the yoke, I could make a new one with correct bolt pattern.

Sorry for a long post.

Last edited by Offroad; 05-19-2017 at 12:43 AM..
Offroad is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 12:36 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.