Microsquirt 16v+t - Page 4

haltechsupra · 12-15-2015, 04:20 PM

stock

haltechsupra · 12-15-2015, 04:26 PM

Coupid · 12-15-2015, 04:52 PM

Quote:

Originally Posted by haltechsupra

Still running the big rod motor i threw in a couple weeks ago, exhaust manifold is cracked so its only 20psi for me, which is enough to run a motorcycle that split traffic between me and someone else and made his own lane. I had to return the mad favor and let him hear the 16v straight piped at full bore, as he so graciously thought he was gonna pick on my car- he tried to pace me but ended up two cars back , shaking his head and turned off as soon as he could. I lol'ed at him. Shouldn't be passing people on the stripe wide open broseph(with his screaming exhaust), with cars in both lanes,just because you can. He learned, i will gamble. people behind me at next light were laughing their ace off.

What's wrong with splitting lanes?

grnmachine02 · 12-15-2015, 04:56 PM

Quote:

Originally Posted by Coupid

What's wrong with splitting lanes?

It's not legal in most places. California is the exception (I think)

edit:// also screaming past people in traffic is a dick move

haltechsupra · 12-15-2015, 07:14 PM

haltechsupra · 12-15-2015, 07:32 PM

Coupid · 12-16-2015, 01:17 AM

Quote:

Originally Posted by haltechsupra

Yes. I was hoping and praying for road to be clear, and it did a few miles down. I caught up to him with no problem, because he really wasn't in a hurry and started cruising again, clearly a dick move. He almost got away with it. I used to have a a sticker on my car that said"loud pipes save lives " I think it was a biker or a summit sticker- it had a few meanings.. But for the guys that ride motorcycles like that , are you really trying to be like hornblasters.com with the shenanigans and loud pipes?
*please see me*

Not amused.

That makes sense, I thought you guys were on a freeway. That guy sounds like a douche, and it doesn't sound like he will be around for very long riding like that.

I love your wagon and the 16v!

haltechsupra · 12-16-2015, 04:15 PM

Thanks!

haltechsupra · 12-17-2015, 04:40 PM

haltechsupra · 12-19-2015, 09:52 AM

Locked up at 8mph going over railroad track,And exploded! Screeched to a halt. I can't say i didn't get my money's worth.. There was a lot of hooning on these 3.73 before they let go.. So in went a 4.10 lsd.

haltechsupra · 12-30-2015, 05:35 PM

haltechsupra · 01-13-2016, 02:42 PM

haltechsupra · 01-27-2016, 03:28 PM

Hello all, been super swamped, which is good. Heres a little video of me and my customer smoking it up 420 style. https://www.facebook.com/jyron.harris/videos/1018179378225143/"]https://www.facebook.com/jyron.harris/videos/1018179378225143/"]https://www.facebook.com/jyron.harris/videos/1018179378225143/
We found his intercooler leak and fixed his bags.Then theres the Square body I have been working on for me. 1978 c-10 with new aluminum heads, pro comp cam, summit intake, headers, new fuel pump and a few other things.https://www.facebook.com/kris.d.weldy/videos/10205103671222976/"]https://www.facebook.com/kris.d.weldy/videos/10205103671222976/"]https://www.facebook.com/kris.d.weldy/videos/10205103671222976/

thelostartof · 01-28-2016, 06:26 PM

Besides street racing have you done a dyno or any 1/4 mile runs with your car to see what kind of power it is making?

haltechsupra · 01-29-2016, 04:54 PM

https://www.facebook.com/kris.d.weld...5281315543973/

some noise driving around

haltechsupra · 02-04-2016, 04:48 PM

I used my smoke machine to see how bad the turbo leaked, and to check for intercooler leaks. Look at what i found! I took housing off and sealed it up with some ultra grey. My smoke machine only produces one psi, so that was a pretty good leak.

https://www.facebook.com/kris.d.weld...5285246442243/

Dirty Rick · 02-04-2016, 08:15 PM

You really need to modify that water pump and get the hose off the header, even if it's wrapped it's still going to compromise the hose.

Cut the water inlet at a slight angle rotate it away from the header welder' up.

haltechsupra · 02-05-2016, 05:31 PM

Video with log manifold and 16 v.

https://www.facebook.com/kris.d.weld...4856323559439/

Quote:

You really need to modify that water pump and get the hose off the header, even if it's wrapped it's still going to compromise the hose.

Cut the water inlet at a slight angle rotate it away from the header welder' up.

I thought the same thing at first, so i wrapped the hose with some exhaust wrap..Hose has been fine so far and i have put about 5,000/7,000 miles on it with turbo out of the hood so far, no hose issues. The egts dropped tremendously, and i think that's why. Plus i am running full e85. I don't ever see the header glow or the turbo glow, things run real cool, and real nice. Good idea though, thanks for the tip.

haltechsupra · 02-21-2016, 01:17 PM

https://www.facebook.com/kris.d.weld...4510531394851/

another video of me just hitting it and getting out of it..

Råda · 02-21-2016, 01:30 PM

lol what?

haltechsupra · 02-25-2016, 05:08 PM

short burst and 1-2 shift..
https://www.facebook.com/kris.d.weld...4510513114394/

haltechsupra · 02-25-2016, 05:11 PM

And, Flames are cool at night...

Stiggy Pop · 02-25-2016, 05:29 PM

yeah that'll turn some heads.

haltechsupra · 02-28-2016, 12:26 AM

Walk around when it was quiet.. er.

https://www.facebook.com/kris.d.weld...4034729420099/

12-10-2015, 11:37 PM	#76
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	__________________ If you had the audacity , to doubt my veracity, and even to insinuate, that I scrupulously prevaricate ,such an insignificant question. Then you must hallucinate before you comprehend. Last edited by haltechsupra; 10-08-2016 at 02:21 AM..

12-15-2015, 04:20 PM	#77
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	stock Last edited by haltechsupra; 10-08-2016 at 02:28 AM..

12-15-2015, 04:26 PM	#78
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	Last edited by haltechsupra; 10-08-2016 at 02:28 AM..

12-15-2015, 07:14 PM	#81
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	Last edited by haltechsupra; 10-08-2016 at 02:29 AM..

12-15-2015, 07:32 PM	#82
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	Last edited by haltechsupra; 10-08-2016 at 02:30 AM..

12-16-2015, 04:15 PM	#84
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	Thanks!

12-17-2015, 04:40 PM	#85
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	Last edited by haltechsupra; 10-08-2016 at 02:16 AM..

12-19-2015, 09:52 AM	#86
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	Locked up at 8mph going over railroad track,And exploded! Screeched to a halt. I can't say i didn't get my money's worth.. There was a lot of hooning on these 3.73 before they let go.. So in went a 4.10 lsd. Last edited by haltechsupra; 10-08-2016 at 02:14 AM..

12-30-2015, 05:35 PM	#87
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	Last edited by haltechsupra; 10-08-2016 at 02:12 AM..

01-13-2016, 02:42 PM	#88
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	Last edited by haltechsupra; 10-08-2016 at 02:11 AM..

01-27-2016, 03:28 PM	#89
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	Hello all, been super swamped, which is good. Heres a little video of me and my customer smoking it up 420 style. https://www.facebook.com/jyron.harris/videos/1018179378225143/"]https://www.facebook.com/jyron.harris/videos/1018179378225143/"]https://www.facebook.com/jyron.harris/videos/1018179378225143/ We found his intercooler leak and fixed his bags.Then theres the Square body I have been working on for me. 1978 c-10 with new aluminum heads, pro comp cam, summit intake, headers, new fuel pump and a few other things.https://www.facebook.com/kris.d.weldy/videos/10205103671222976/"]https://www.facebook.com/kris.d.weldy/videos/10205103671222976/"]https://www.facebook.com/kris.d.weldy/videos/10205103671222976/ Last edited by haltechsupra; 10-08-2016 at 02:13 AM..

01-28-2016, 06:26 PM	#90
thelostartof unbalanced chemical Join Date: Jun 2002 Location: Apache Junction, AZ	Besides street racing have you done a dyno or any 1/4 mile runs with your car to see what kind of power it is making? __________________ Chip Feedback Thread / PM LH 2.4 Chip Prices

01-29-2016, 04:54 PM	#91
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	https://www.facebook.com/kris.d.weld...5281315543973/ some noise driving around Last edited by haltechsupra; 05-04-2016 at 11:23 PM..

02-04-2016, 04:48 PM	#92
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	I used my smoke machine to see how bad the turbo leaked, and to check for intercooler leaks. Look at what i found! I took housing off and sealed it up with some ultra grey. My smoke machine only produces one psi, so that was a pretty good leak. https://www.facebook.com/kris.d.weld...5285246442243/ Last edited by haltechsupra; 05-04-2016 at 11:25 PM..

02-04-2016, 08:15 PM	#93
Dirty Rick Board Member Join Date: Apr 2013 Location: Cornholio, OR	You really need to modify that water pump and get the hose off the header, even if it's wrapped it's still going to compromise the hose. Cut the water inlet at a slight angle rotate it away from the header welder' up.

02-21-2016, 01:17 PM	#95
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	https://www.facebook.com/kris.d.weld...4510531394851/ another video of me just hitting it and getting out of it.. Last edited by haltechsupra; 05-04-2016 at 11:31 PM..

02-21-2016, 01:30 PM	#96
Råda Volvoretard/Partshoarder Join Date: Jan 2010 Location: Örebro, Sweden	lol what? __________________ Jonas

02-25-2016, 05:08 PM	#97
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	short burst and 1-2 shift.. https://www.facebook.com/kris.d.weld...4510513114394/ Last edited by haltechsupra; 05-04-2016 at 11:32 PM..

02-25-2016, 05:11 PM	#98
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	And, Flames are cool at night...

02-25-2016, 05:29 PM	#99
Stiggy Pop Board Member Join Date: Feb 2011 Location: Granville, MA	yeah that'll turn some heads. __________________ '79 242 943 pickup

02-28-2016, 12:26 AM	#100
haltechsupra Board Member Join Date: Jun 2004 Location: Texas	Walk around when it was quiet.. er. https://www.facebook.com/kris.d.weld...4034729420099/ Last edited by haltechsupra; 05-04-2016 at 11:33 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode