MSGGrunt
New member
- Joined
- Feb 13, 2018
- Location
- Western Massachusetts
I have read but am still looking for advice... I replaced the front rotors and calipers and can't get the pressure to come up. I only opened the front hoses so does that mean I don't have to worry about air/bleeding the rear? I clamped off the hoses when I changed the calipers, bolted everything back up and used a Motive Power bleeder at 20 pounds. I cracked the bleeders, air sputter out and then what I believe was air free fluid. Problem is, the brake pedal still goes straight to the floor with no resistance.
Advice as I need the car back on the road.
Advice as I need the car back on the road.