Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
You need hub centric spacer/adapters. The Volvo's hubs are 65.176mm and has a 5x108 bolt pattern, and it's likely your BMW wheels are 5x120. Will probably need the fenders rolled too to fit them in there.Offset and adapters confuse me, so could someone help I have a 1989 760 wagon. I found some cheap BMW wheels I like and wondering if they will fit with an adapter. My car currently is on Hydras, which I believe are 16x6.5" The BMW wheels I found are 16x7, ET20, 72.5 bore
What do I need?
The title of this thread is literally show your wheels
If you're not showing wheels, or supporting someone else who has shown wheels, this is not the right thread.
Not trying to be a grump but geeze people.
Shopped for now, not going on my car though. Some special tuning brand from the 90s for BMW's 17x8,5