eregan
Member
- Joined
- Feb 24, 2018
- Location
- Massachusetts
Have been working on this car for a year or so now, has come together nicely.
https://www.youtube.com/watch?v=Q9ajtR14wSU
Suspension mods:
IPD sways & panhard, poly bushes almost everywhere, cut IPD springs, Koni yellows up front, KYB in rear, Kalplhenke QSRC, Kaplhenke strut brace w/ master cyl reinforcer.
Power mods:
Ported 83' BCP head, 5-angle valve cut, shaved .045, Cometic .027 HG, RSI Stage 1 N/A cam, STS adj cam gear, pink injectors, Cherry Bomb side pipe exhaust, chip tune.
Other sh*t:
Gutted heater core/blower motor, removed a lot of insulation, AC delete, Subaru seat, China short throw shifter w/ brass bushes, 52mm Volvo tach, 52mm VDO voltage gauge, AEM wide-band.
Special thanks to: Sudbury Volvo Service, photoman327, redblockpowered, shoestring, and mblue240 for helping me with advice and parts on this build.
https://www.youtube.com/watch?v=Q9ajtR14wSU
Suspension mods:
IPD sways & panhard, poly bushes almost everywhere, cut IPD springs, Koni yellows up front, KYB in rear, Kalplhenke QSRC, Kaplhenke strut brace w/ master cyl reinforcer.
Power mods:
Ported 83' BCP head, 5-angle valve cut, shaved .045, Cometic .027 HG, RSI Stage 1 N/A cam, STS adj cam gear, pink injectors, Cherry Bomb side pipe exhaust, chip tune.
Other sh*t:
Gutted heater core/blower motor, removed a lot of insulation, AC delete, Subaru seat, China short throw shifter w/ brass bushes, 52mm Volvo tach, 52mm VDO voltage gauge, AEM wide-band.
Special thanks to: Sudbury Volvo Service, photoman327, redblockpowered, shoestring, and mblue240 for helping me with advice and parts on this build.