home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > projects & restorations

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-25-2020, 08:11 PM   #11
940 16 valve
Board Member
 
940 16 valve's Avatar
 
Join Date: Oct 2005
Location: Calgary, Alberta
Default

Overdue for an update. been plugging away. Also started a business so that's kept me busy.
Registration on the 940 ends in June, so the goal is to have it running sometime this summer.

Progress so far.

Got a 240mm clutch from southbend with T5 center

They were able to make the clutch the same thickness as stock, so no engagement height issues like I had with the 940.
My brother wants to swap his s70 from dual to single mass flywheel when do the clutch, so you can see the TTV flywheel under the clutch. Considering getting one for mine, but there is so much material taken off I wonder if it will make the already noisy T5 transmission unbearable. Still searching for a used single mass in the meantime.

Found some 5" outer diameter moog coils (Moog 8088) that were new in box for $10 locally. We'll run them and see. I think they're 260lb/in which should play well with the motion ratio or the rear arm which looks to be about .73. They're 15" long so will need cut though.

Wife's S40 had shifting issues so I got sidetracked replacing some linear solenoids.

Played with ride height and some 18's I have while I had the springs out. I think around here would be nice.

Plumbed the Idler motor and got the intake installed.

Pretty adapter plate

Picked up an ebay intercooler. had to do some trimming where the elbows are, and welded in some angle iron beside it to not lose structural integrity.

At this point I just need to get a flywheel and then I'm on the home stretch.
I found a input retainer from a s197 mustang with the 4.0 V6 and T5 transmission. Allows you to run a hydraulic slave, so I'm going to see if I can adapt that. They offer a short version of the slave (SB60317) which I will likely use.

Then it's just taking the 940 off the road to swap the driveline, and then a million little things. Progress though!
__________________
1991 940 - stock b234+t -retired http://forums.turbobricks.com/showthread.php?t=243308
1989 760 - T5 +T5 swapped http://forums.turbobricks.com/showthread.php?t=341191
940 16 valve is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 11:43 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.