Texas Old Fart
New member
- Joined
- Apr 19, 2020
- Location
- Huntington, TX
Will cam tolerances and or distributor gear off by a tooth cause engine to run hot?
I have b230 NA with Turbo cam. 10 thou clearance on lifters. The heat gauge does not go above 1/3 scale, but an uncomfortable amount of heat is coming of the engine even on the intake side.
I have b230 NA with Turbo cam. 10 thou clearance on lifters. The heat gauge does not go above 1/3 scale, but an uncomfortable amount of heat is coming of the engine even on the intake side.