home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Reply
 
Thread Tools Display Modes
Old 05-14-2017, 10:13 AM   #1
whitey5150
Board Member
 
Join Date: Jan 2012
Default vacuum line question

I have a b230ft swapped volvo 240 with lh2.4 it has a Garrett t25. the recirculation valve there is a little one way valve. My problem is that it holds vacuum all the time so the valve stays open so boost is crap. How is it supposed to function? I had to make a small hole in the vacuum line after the valve so it wouldn't hold vacuum under boost but that's not proper.

edit: it also stalls or stumbles if you go from boost to brakes, normally it doesnt stall but you boost hard and try to come to a complete stop immediately or like do a burnout and just stop it will stall.

Last edited by whitey5150; 05-14-2017 at 01:52 PM..
whitey5150 is offline   Reply With Quote
Old 05-15-2017, 09:51 AM   #2
EivlEvo
Board Member
 
Join Date: Sep 2012
Default

Where do you have the line hooked up?
EivlEvo is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 02:23 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.