home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 11-19-2018, 03:44 PM   #26
kingkong
Board Member
 
kingkong's Avatar
 
Join Date: Jan 2017
Location: France
Default

Before I take the gearbox down (what a ****in pain in the ass) could somebody confirm the part numbers on clutch disc and pressure plate please?

Again, does it need to be bedded in or not?
kingkong is offline   Reply With Quote
Old 11-19-2018, 03:49 PM   #27
culberro
Ronald Culberbone III
 
culberro's Avatar
 
Join Date: Feb 2010
Location: Portland, OR
Default

WAY too much grease on the hub. You just need a little bit on the inside of the spline area, it's doing nothing sitting on the face of the hub like that. The extra grease could have gotten onto the pressure plate, causing the disc to slip.
__________________
Cult Person. Pissing in your Kool-Aid.
culberro is offline   Reply With Quote
Old 11-19-2018, 08:43 PM   #28
sbabbs
Board Member
 
sbabbs's Avatar
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default

I second that too much grease for sure. Once your disc starts spinning all that goes out towards the clutch surface. I put a dab of never seize on the input shaft where the throw out bearing moves back and forth. That is all I do. That never spins.

https://re-volvparts.com/store/home/...ine-volvo.html

850R Clutch Kit 272218 Genuine Volvo
__________________
1988 245 White slicktop M47 Wagon! 2.5L NA 8v going in.
1990 745 B230FT Getrag JohnV flywheel 240mm clutch 13c A-cam 3.54 G80 548K MILES
1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's. 3.73 G80 M90 to put in.
sbabbs is offline   Reply With Quote
Old 11-20-2018, 04:26 AM   #29
kingkong
Board Member
 
kingkong's Avatar
 
Join Date: Jan 2017
Location: France
Default

Didn't think that much grease could cause so much slip.

I guess it's disassembly time i guess. Shyte. Thank you guys.
kingkong is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 04:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.