home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-23-2019, 12:35 PM   #1
Board Member
Join Date: Dec 2017
Location: Switzerland
Default b230fk dynoresults (211whp)

hey guys,
found time to do a dynopull and it went pretty much as i expected.

i hit 250bhp(211whp) at 4400rpm and 401nm at 3800rpm with following setup.

- unopened b230fk with 250kilometers (stock 530 head)
- mamba td04hl-20T, 7cm housing (cone-outlet) at 14PSI (1bar)
- 3" DP - 3" 200cell cat - 2.5" Simons exhaust (2 mufflers)
- VX3 cam (stock timing)
- 012 maf / 440cc Green Giants injectors
- Stoni´s chips (lh/ezk)
- Kl-Racing Intercooler
- Snowperformence Water/Meth Injection (starts at 6Psi)
- TTV Racing Flywheel with 850R Clutch
- NGK bpr8es sparkplugs

i was surprised in the first place that the peak hp number was at 4400rpm, but in the end i think it´s due the small hotside and mild VX3 cam. it still continued to 5500rpm with 200whp, so no big loss in power. Afr´s were spot on 11.2/1 with 50% meth in the watertank.

The numbers come from a dynojet, which should be pretty realistic. I Guess haha

Thread is for those who care (:
swizzy is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 09:51 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.