home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 11-12-2020, 04:04 PM   #1
DavePolyakov
Board Member
 
Join Date: Aug 2020
Default Pedal box swap question

Manual pedal box swap for cable clutch into 1990 740. I got the box into the correct position, but the top left bolt doesn't line up. It looks like the bolt for the clutch pedal is rubbing against the piece of metal on the left. Does this piece get removed and attached to to the new pedal box? I'm not exactly sure.



DavePolyakov is offline   Reply With Quote
Old 11-12-2020, 04:20 PM   #2
Swedbrick
Board Member
 
Swedbrick's Avatar
 
Join Date: Oct 2016
Location: Netherlands, Source of Grolsch
Default

Yes you have to remove the rivets, some models come with a removable slider those are easily interchanged, this will require new rivets
__________________
Volvo 745 - IPD springs, 25mm front w 19mm rear swaybars, K-cam, LH2.4, M90 swap, 3.54 racingdiff lsd, track/daily
Swedbrick is offline   Reply With Quote
Old 11-12-2020, 04:57 PM   #3
DavePolyakov
Board Member
 
Join Date: Aug 2020
Default

Typical 30-minute job turning into a 3-hour job and extra money! I'll probably try to use something else than rivets because I don't have rivets or a rivet gun. This will probably be ok right?
Quote:
Originally Posted by Swedbrick View Post
Yes you have to remove the rivets, some models come with a removable slider those are easily interchanged, this will require new rivets
DavePolyakov is offline   Reply With Quote
Old 11-29-2020, 10:15 AM   #4
dalek
Benchracer Tribe
 
dalek's Avatar
 
Join Date: Oct 2005
Location: Orange Alert, NC
Default

A bolt + nut + lockwasher would be what I would use
__________________
"you can't leave your thingy hanging in public... you can get arrested."
"What's Arkansas supposed to be, Kansas for pirates?" Forg
"I think I can touch the tire. Damn! I can touch the tire! That hurts!" 240Psycho (on the back seat of my 94 Jetta while I was driving to a J/Y)
"Use the barbed adapter like what I use to inflate the air camping mattresses and my dates." FTF Engineering
i am inspired. i will replace my windsheild... with an intercooler.swedishK
Feedback!
dalek is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 06:28 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.