- Joined
- Dec 25, 2002
- Location
- mont, AL
there's supposed to be some "gap" there, that doesn't look all that bad. the diameter on the adapter could be changed fairly easily.
by gap I mean when you're putting a trans in a car, typically the converter slides back forwards to bolt up to the flex plate. I think they actually call it 'float'
I am intrigued by this though, good info!
by gap I mean when you're putting a trans in a car, typically the converter slides back forwards to bolt up to the flex plate. I think they actually call it 'float'
I am intrigued by this though, good info!