DET17
Reformed SAABaholic
- Joined
- Nov 1, 2009
- Location
- NW Georgia
<a href='http://i.imgur.com/zLg0RYI' title=''><img src='http://i.imgur.com/zLg0RYIl.jpg' alt='' title='Hosted by imgur.com' /></a>
This is what $40 gets me. Seem legit with the right part number off an '05 s60r. O rings seem fine to me so I guess just run them? I still have to find/buy an 012 amm to go with them.......
.....I'm looking forward to taking my distributor off. To plug the hole, is it really just that cap thing? I have one of those plates to hold the cap in place also.
Those injectors look legit; the rip offs won't have the VOLVO PN on the opposite side, and they have multiple slots at the rail end connection (yours have only one, Volvo fuel rail only). Fuelinjectorconnection in ATL will clean them & flow them for $12 each, plus shipping. Of course, you can run "as is" without the peace of mind. Your wallet will decide.
Re. the distributor less mods, you need (1) the 15A plate to cover and hold (2) the sealing plug, which is pressed into the end of the #5 cam bearing. I think I put anaerobic sealant around that plug before I installed the cover plate. I've honestly forgotten, but details are in my thread. There is an OE PN for the plug you need.