mossicon
New member
- Joined
- Apr 4, 2016
- Location
- Portland, OR
I am converting my '84 245 from LH2.1 to LH2.2 with EZK117, eventually buying the full harness conversion from Dave Barton. I have a question about two AMMs I found at my local junkyard. Both are Bosch P/N 0 280 212 007 required for the conversion, however, when looking at the 6-pin terminals, one has 3 adjoining terminals at one height, while the other three terminals are lower (not seen in the image of the AMM on the left). You can see the one on the right's terminals are all even. Has anyone run into this, especially with the conversion harness from Dave Barton: http://www.240turbo.com/volvoharnesses.html#240conversionharness
Any help would be of great help!
Any help would be of great help!