• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

740 Catalytic converter triangle flange

oifish

oifish

I'm feeling extra zazzzy
Joined
Jul 30, 2014
Location
Indiana
My brothers 745 NA has a leak at the flangle around the catalytic converter. The cat is fine but he triangle flange is all jacked up, so he'd rather not replace the whole thing. I saw a post on here about a month back that had a flange is the same concept as this: https://www.ebay.com/itm/FX57S-2-5-8-Triangle-Split-Exhaust-Flange-Repair-for-2-1-2-2-5-Flared-Y-Pipe/172525796497?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D47300%26meid%3D790b45d061af427d9877a2fc426e0bed%26pid%3D100623%26rk%3D5%26rkt%3D6%26sd%3D181769350077&_trksid=p2047675.c100623.m-1
But it looked a lot less fleabay quality. Does anyone know what I'm talking about, or know of that post.

I already tried searching, a lot, but can't find it.
 
Problem is we're in the States and often the shipping from Skandix is more than the part!:grrr:

mocambique-amazone said:
I highly recommended this from skandix

http://www.skandix.de/en/search/?q=1016090

Lot lot and lot better than the sh... stuff the other noticed. Why buy poor quality when you will get the best.
Used several times, the other stuff above went into the bin :-)
Don't forget the seal ring!!
Regards, Kay
Click to expand...
 
carver said:
Problem is we're in the States and often the shipping from Skandix is more than the part!:grrr:
Click to expand...

Yea if this was for an immaculate 16V-Turbo build I'd consider it, but it just my brothers daily NA wagon. Thanks for the tip though!
 
FYI, here it is in action. (sorry for slightly blurry)

IMG_0071.jpg
 
You must log in or register to reply here.
Back
Top