• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

S/V/C turbo coolant supply

C

choochoobrick

New member
Joined
Oct 18, 2018
I'm heavily struggling with replacing my turbo coolant supply line on my '98 v70xc. Any pointers on how to make this task a bit easier?
 
I assume you're struggling with the banjo bolts on the turbo? Just be patient and make sure the banjo bolts are threading in correctly. You may want to pick up a ratcheting stubby wrench for them. I believe they're 17mm.

You need two copper washers per banjo bolt.

I find it's easiest to remove/install the lines with the turbo out of the car. Just make sure you mark their orientation for when you reinstall.
 
You must log in or register to reply here.
Back
Top