IPD Garage Sale, May 19, 2018 - Page 4

John242Ti · 05-13-2018, 01:23 AM

245's going to iPd. All my problems (other than the timing) post head swap were caused by a broken ground wire for the Lambda-Sond system.

Khrrck · 05-15-2018, 11:59 AM

I'll be rolling the disaster down to IPD as usual.

Redwood Chair · 05-15-2018, 03:48 PM

I know you guys won't miss me but you'll miss me.

Harlard · 05-15-2018, 03:56 PM

Quote:

Originally Posted by Redwood Chair

I know you guys won't miss me but you'll miss me.

It's not like you even want to be there, let's be honest.

sbabbs · 05-15-2018, 04:17 PM

Gonna try and make it, but will be real busy tuning my 13c turboed redblock 745 546k thousand mile rat wagon that will be king of the bolbos sat night at PIR! Greenslips..

Bring yur 2 dorr 240's and watch my ass blow by.

Yeah leave yur slicks at home... I ain't gonna.

Just remember slicks, like dicks NHRA rule, driveshaft loop required..

Yeah the head gasket is blown, but it only blows water out the rear pipe so I go, go, go with it. Head might be cracked, I mighta torqued it down 180 instead of 90..

LC4CARL · 05-15-2018, 05:25 PM

So, hypothetically, if you happen to see an unusually handsome man (similar to the one below) wandering the sale with a good-hearted demeanor but, evidently oblivious of who is who, shake his hand and introduce yourself.

Harlard · 05-15-2018, 06:07 PM

Hide yo daughter, Carl. This is Turbobricks after all.

LC4CARL · 05-15-2018, 06:28 PM

LC4CARL · 05-15-2018, 06:30 PM

Quote:

Originally Posted by Redwood Chair

I know you guys won't miss me but you'll miss me.

Now what am I going to do for lunch?

Khrrck · 05-15-2018, 07:04 PM

Why doesn't IPD have 240 washer nozzles on hand?

Quote:

Originally Posted by LC4CARL

Now what am I going to do for lunch?

¯\_(ツ)_/¯

I always seem to miss the lunch run at these things.

MrBrown · 05-15-2018, 09:54 PM

245 ain’t making it. Burned through the paint trying to wet sand out some runs. Not enough time to respray and get it looking right. Man am I learning a lot from this project!

Carl, I’ll meet up with you once I get here. Wife’s dropping me off in the presidential ride.

Redwood Chair · 05-15-2018, 10:13 PM

Quote:

Originally Posted by LC4CARL

Now what am I going to do for lunch?

Buy a burger at the gate like everybody else.

I only

at Davis and the back yard meats.

LC4CARL · 05-15-2018, 10:21 PM

Quote:

Originally Posted by MrBrown

245 ain’t making it. Burned through the paint trying to wet sand out some runs. Not enough time to respray and get it looking right. Man am I learning a lot from this project!

Carl, I’ll meet up with you once I get here. Wife’s dropping me off in the presidential ride.

Very sorry to hear that. You've put in a huge effort.

See ya there.

LC4CARL · 05-15-2018, 10:22 PM

Quote:

Originally Posted by Redwood Chair

Buy a burger at the gate like everybody else.

I only

at Davis and the back yard meats.

Meh, won't be the same.

Redwood Chair · 05-15-2018, 10:23 PM

Quote:

Originally Posted by LC4CARL

Meh, won't be the same.

The evergood hot links were tasty for sure.

cwdodson88 · 05-15-2018, 10:34 PM

Well the 122 is going to miss another year.

MrBrown · 05-15-2018, 11:34 PM

I feel you Chris. Seems like luck isn’t on our side this year.

MrBrown · 05-15-2018, 11:35 PM

Maybe afterwards we’ll have a round befor I head home.

John242Ti · 05-16-2018, 12:18 AM

Quote:

Originally Posted by MrBrown

245 ain’t making it. Burned through the paint trying to wet sand out some runs. Not enough time to respray and get it looking right. Man am I learning a lot from this project!

Carl, I’ll meet up with you once I get here. Wife’s dropping me off in the presidential ride.

How far down did you go? If there's still primer, just drive it. Then, before the next meet occurs, get it finished. If I wound up driving my 242 to iPd, I'd be missing paint, too. The whole roof is pretty much primer.

-J

cwdodson88 · 05-16-2018, 12:35 AM

Almost want to just stay home and get some stuff done before Volvo’s in the Hood

BonerInSweatPants · 05-16-2018, 12:40 AM

Quote:

Originally Posted by Redwood Chair

Quote:

Originally Posted by LC4CARL

Now what am I going to do for lunch?

Buy a burger at the gate like everybody else.

LAST WE SKIPPED IKEA AND WENT TO PINE STATE ON ALBERTA. IT WAS A MUCH BETTER CHOICE

A post shared by E. DIDDY (@thelaughterguns) on Jun 17, 2017 at 1:17pm PDT

Quote:

Originally Posted by Redwood Chair

The evergood hot links were tasty for sure.

COSIGNED

gsellstr · 05-16-2018, 01:14 AM

^^^^ was a MUCH better option for sure.

Almost got the wagon ready for the trek, gotta make it handle boost on pump, think I've got it handled, plus a revised 91* tune, guess we'll see in a couple days.

Simon...maybe we need a 745 pairing, see how your 13c does against my Garrett, since turbo size doesn't matter, only max bewstsss since all turblows are created equal. lol

MrBrown · 05-16-2018, 02:18 AM

Quote:

Originally Posted by John242Ti

How far down did you go? If there's still primer, just drive it. Then, before the next meet occurs, get it finished. If I wound up driving my 242 to iPd, I'd be missing paint, too. The whole roof is pretty much primer.

-J

Shot single stage urethane and won’t do that again. It’s through to the primer but since I have the rear quarter window out I figured I would leave it out since I’m reshooting it. I’d rather show it off once it’s finished. Last year it looked horrible but I really wanted to go to a show for the first time ever.

Is Volvo’s in the hood happening this year? If so when?

John242Ti · 05-16-2018, 03:09 AM

It is. I don't remember the exact day, but it's next month, as is the Leavenworth drive. Plan is to have the 242 driving for either one of those meets.

Just looked on IG. 6/30/18. Leavenworth Drive is a month from tom'w. Might take the 245 on the Leavenworth Drive, then take the 242 to VITH. Who knows, if I can get my parents interested, maybe they'd drive down in the 745 to VITH as well.

-J

benski · 05-16-2018, 08:33 AM

Ought to start some more threads in the events section here for these two meets.

05-13-2018, 01:23 AM	#76
John242Ti LH-Jet & Carb Free Zone Join Date: May 2003 Location: Duvall, WA	245's going to iPd. All my problems (other than the timing) post head swap were caused by a broken ground wire for the Lambda-Sond system. __________________ 1982 242Ti - black, B23FT/M46 combo. @john242ti on IG

05-15-2018, 04:17 PM	#80
sbabbs Board Member Join Date: Dec 2006 Location: Rushing Lane, Scappoose, OR	Gonna try and make it, but will be real busy tuning my 13c turboed redblock 745 546k thousand mile rat wagon that will be king of the bolbos sat night at PIR! Greenslips.. Bring yur 2 dorr 240's and watch my ass blow by. Yeah leave yur slicks at home... I ain't gonna. Just remember slicks, like dicks NHRA rule, driveshaft loop required.. Yeah the head gasket is blown, but it only blows water out the rear pipe so I go, go, go with it. Head might be cracked, I mighta torqued it down 180 instead of 90.. __________________ 1988 245 White slicktop M47 Wagon! 93 b230f. LH 2.4 STS flat flywheel. 1990 745 B230FT Getrag JohnV flywheel 240mm clutch 13c A-cam 3.54 G80 555K 1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's. 3.73 G80 M90 to put in. 1995 940 White racing wagoon. 13c. Last edited by sbabbs; 05-15-2018 at 04:25 PM..

05-15-2018, 05:25 PM	#81
LC4CARL Aero challenged Join Date: Sep 2008 Location: Vancouver, WA	So, hypothetically, if you happen to see an unusually handsome man (similar to the one below) wandering the sale with a good-hearted demeanor but, evidently oblivious of who is who, shake his hand and introduce yourself. __________________ @PDXvolvo on IG B21FT with a T3/T4, STS coil-overs, T5 trans.

05-15-2018, 09:54 PM	#86
MrBrown Board Member Join Date: Mar 2011	245 ain’t making it. Burned through the paint trying to wet sand out some runs. Not enough time to respray and get it looking right. Man am I learning a lot from this project! Carl, I’ll meet up with you once I get here. Wife’s dropping me off in the presidential ride. __________________ GhettoFab build thrizzie

05-16-2018, 01:14 AM	#97
gsellstr Vintage anti-ricer Join Date: Oct 2004 Location: BFE Desert east of Cali	^^^^ was a MUCH better option for sure. Almost got the wagon ready for the trek, gotta make it handle boost on pump, think I've got it handled, plus a revised 91* tune, guess we'll see in a couple days. Simon...maybe we need a 745 pairing, see how your 13c does against my Garrett, since turbo size doesn't matter, only max bewstsss since all turblows are created equal. lol __________________ RIP Doug Williams "Mr. Doug" 4/15/2009 Pete Fluitman "fivehundred" 7/14/2013 Mick Starkey "TrickMick" 1/10/14 Mark Baldwin "blue850t5" 7/19/18 Nick Fengler "fengler" 8/6/18 Thomas Fritz "stealthfti" 10/11/18 Bob Davi "bob davi" 10/2021 74 144 B20 http://forums.turbobricks.com/showthread.php?t=224983 90 745Ti http://forums.turbobricks.com/showthread.php?t=334698 If you need Superpro bushings PM me for price and availability!

05-15-2018, 06:07 PM	#82
Harlard Hurlurd?Harland?Bueller? Join Date: May 2007 Location: PDX	Hide yo daughter, Carl. This is Turbobricks after all.

05-15-2018, 06:28 PM	#83
LC4CARL Aero challenged Join Date: Sep 2008 Location: Vancouver, WA

05-15-2018, 11:34 PM	#92
MrBrown Board Member Join Date: Mar 2011	I feel you Chris. Seems like luck isn’t on our side this year.

05-15-2018, 11:35 PM	#93
MrBrown Board Member Join Date: Mar 2011	Maybe afterwards we’ll have a round befor I head home.

05-16-2018, 12:35 AM	#95
cwdodson88 Board Member Join Date: Oct 2011 Location: The Dalles, Oregon	Almost want to just stay home and get some stuff done before Volvo’s in the Hood

05-16-2018, 03:09 AM	#99
John242Ti LH-Jet & Carb Free Zone Join Date: May 2003 Location: Duvall, WA	It is. I don't remember the exact day, but it's next month, as is the Leavenworth drive. Plan is to have the 242 driving for either one of those meets. Just looked on IG. 6/30/18. Leavenworth Drive is a month from tom'w. Might take the 245 on the Leavenworth Drive, then take the 242 to VITH. Who knows, if I can get my parents interested, maybe they'd drive down in the 745 to VITH as well. -J

05-16-2018, 08:33 AM	#100
benski Board Member Join Date: Jul 2008 Location: Olympic Peninsula, Wa. State	Ought to start some more threads in the events section here for these two meets.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode