home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Reply
 
Thread Tools Display Modes
Old 01-06-2018, 05:15 PM   #1
Johnnysalt
Board Member
 
Join Date: Aug 2015
Default 89 volvo 240, Fuel gauge and temp gauge don't move. Also: sob story.

So back in the spring of 2016 I loaned my 240 to my dad, and then in November it stopped running.
I was busy, so I didn't have time to look at it, and then I had a moderate sized stroke. Weird I know, since i was only 29 at the time. I recovered, sort of, and in august me and my dad decided to fix it up. We got it running but we quickly realized that it had an issue charging the battery. We put a new alternator and battery in, but then my Dad died of cancer. So this story is partially about how life took a big **** on me, and partially about how my volvo did too. I'm like a **** magnet these days. Also it was about this time that we noticed neither the temp gauge or fuel gauge functioned at all. Neither one moves. Anyway, The other day I took it upon myself to make the damn thing run. I jumped it, but didn't check the battery, later on i found out that it's only putting out 2.65 volts. So in the process of driving the thing home, I trashed my alternator. Then the car died and I had to get it towed when I was halfway there. Luckily the battery and alternator were under warranty, so I replaced them both. Now the alternator is putting out 13.9 volts and that problem is solved. But I'm still trying to figure out why the temperature and fuel gauges stopped working simultaneously.

Any ideas?
Johnnysalt is offline   Reply With Quote
Old 01-06-2018, 06:31 PM   #2
TestPoint
Board Member
 
TestPoint's Avatar
 
Join Date: Jul 2009
Location: Ellijay
Default

Yes, you have had some issues!

I am not a later model specialist but earlier cars had a 10v (or 5v for real early cars) voltage regulator mounted on the back of the instrument cluster. The regulated voltage permitted more accurate meter readings than the wide variation of battery/alternator voltage.

That or the fuse or electrical connection from the fuse to the instrument panel.
__________________


1982 Volvo 245 with a Ford 302 V8

Ford V8 Conversion Manual -
http://forums.turbobricks.com/showthread.php?t=250257

Bertone Restoration - http://forums.turbobricks.com/showthread.php?t=256460
TestPoint is offline   Reply With Quote
Old 01-07-2018, 11:38 AM   #3
ZVOLV
<Master Tech>
 
ZVOLV's Avatar
 
Join Date: Nov 2002
Location: California
Default

Give it some acoustic tuning. (smack dash with fist.)
__________________
No Start Thread
ZVOLV is offline   Reply With Quote
Old 01-07-2018, 11:44 AM   #4
TWD
Board Member
 
TWD's Avatar
 
Join Date: Jul 2009
Location: Atlanta
Default

I have a known good used cluster voltage regulator. If this is a repair that you can do, I am happy to send it your way.
TWD is offline   Reply With Quote
Old 01-08-2018, 12:10 PM   #5
wyatt8740
Board Member
 
wyatt8740's Avatar
 
Join Date: Mar 2017
Location: Fort Wayne, Indiana
Default

I had some crappy wiring be the culprit for me once.
I jiggled the wires around behind the dash and the gas/temp. gauges started working again immediately. It's not happened in 8 months so I'm not entirely sure what needs to be fixed.

I'd try it before getting a voltage regulator.

If you do need a regulator, you can also just buy a 7810 (LM7810, a common 10 volt linear voltage regulator) for a few cents and run a tiny bit of wire to swap the left and right pins, or mount it backwards and put a sheet of aluminum on the top to act as a new heat sink (pins 1 and 3 are swapped from the TCA700Y).
https://www.mouser.com/Search/Refine...Keyword=lm7810

If TWD's offering to give you one, you might as well take that though.
__________________
1991 244 (manual 5spd)
And the Dalai Lama smiled and said, 'Well my son, life is like a beanstalk, isn't it?'

Last edited by wyatt8740; 01-08-2018 at 12:17 PM..
wyatt8740 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 01:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.