Jack
junkman
- Joined
- Jul 7, 2011
- Location
- The Ass Cheek Of History
Lost the instructions. What’s the drill size I need?
Edit title should say yoshifab
Edit title should say yoshifab
Last edited:
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
.This kit allows you to replace the factory o-ring sealed hard line with a -10 AN oil return hose. The fitting is a press fit into the block and includes everything you will need to install this fitting. You will get the Yoshifab -10 conversion fitting, a wire brush to clean the grime off of your block, a -10 AN cap, Loctite green press fit formula, and detailed instructions. This kit only works with blocks that have the factory oil return hole.
What! I thought you could drill the blank one and still use this