home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 11-16-2017, 02:35 PM   #1
Louw78
Newbie
 
Join Date: Feb 2017
Location: South Africa
Default Narrowband afr.

Is a narrowband install in a 940 going to worth my while?
Wideband is still out of reach at this stage, i just want something to keep me from causing damage to my engine. Mods are very light at this stage, just running about 12 psi and a 2.5 inch single muffler free flowing exhaust.
Loads of posts confirm that fueling shouldn’t be a problem at these boost levels.

How would I even go about wiring the n/b o2? Splice into exciting o2 wiring?

Looking forward to some insight.

Marius.
__________________
1996 940 wagon uk spec. Mostly stock, 12psi, 2.5in exhaust
Louw78 is offline   Reply With Quote
Old 11-16-2017, 03:24 PM   #2
PCH
Board Member
 
Join Date: Oct 2008
Location: SoCal
Default

Tap a voltmeter (0-1 Volt range or so) into the O2 signal wire. I had one on my K-Jet VW for a while and it was giving enough info to dial a/f ratio into proper range.

You can buy plug and play panel meters on e-bay for few dollars. Not the fastest refresh rate but enough to give you an idea about a/f.



Something like this http://www.zeitronix.com/Products/O2Meter/O2Meter.shtml can be built for $5. Even a free giveaway meter from Harbor Freight can do the job.

Last edited by PCH; 11-16-2017 at 03:34 PM..
PCH is offline   Reply With Quote
Old 11-16-2017, 03:35 PM   #3
tryingbe
Boosting along.
 
tryingbe's Avatar
 
Join Date: Apr 2004
Location: Mesa, AZ
Default

Quote:
Originally Posted by Louw78 View Post
Is a narrowband install in a 940 going to worth my while?

Nope. Save the money.
__________________
85 GLH 367whp
00 Insight mpg > yours.
tryingbe is online now   Reply With Quote
Old 11-16-2017, 04:08 PM   #4
24DinCT
Don Juan De La Nooch
 
24DinCT's Avatar
 
Join Date: Jan 2008
Location: Rusty buttcheeks and busted doorhandles,CT
Default

Quote:
Originally Posted by tryingbe View Post
Nope. Save the money.
What he said...

There are multiple sellers on eBay selling brand new AEM UEGOs for @$130. Basically a 2 wire install being just switched 12V+ ignition power, and a ground...the rest is plug-n-play.

The "best" narrowbands do nothing and are quite slow at best.

There's no reason to waste $ on a narrowband when a functional wideband can be had for a decent price.
__________________
83 244 DL+Ti---Being parted
82 242 TI project---bare bones, shaved, and tucked...never gettin done
Quote:
Originally Posted by blackbrick82 View Post
It's all about the beer.
Quote:
Originally Posted by blkaplan View Post
how come everytime i in the kitchen, you in the kitchen, in the god damn refridgerator
Buy my partz...here
Feedback...here
24DinCT is offline   Reply With Quote
Old 11-16-2017, 04:12 PM   #5
Louw78
Newbie
 
Join Date: Feb 2017
Location: South Africa
Default

Thanks, I needed to hear that. Will safe money and get the proper stuff
Louw78 is offline   Reply With Quote
Old 11-16-2017, 04:18 PM   #6
142 guy
Board Member
 
Join Date: May 2014
Location: Saskatchewan, Canada
Default

The OEM O2 sensor is a narrow band sensor and can sort of work for tuning to an AFR of 14.7. It is painful because they are highly non linear and as a result you really don't know how much above or below 14.7 you are currently running. The output voltage will just tell you whether you are above, below or at 14.7 (fat chance of that). The normal operation for the OEM tune is to have the O2 sensor voltage oscillate back and forth (above and below 14.7) past the O2 sensor switchpoint. If you have a high impedance voltmeter you can connect to the OEM sensor to monitor its output for no cost.

If you a short on change, 14point7.com offers up their SLC FreeA with 4.9 wideband sensor for $85. That includes an LCD display for the Lambda (instead of AFR) and inferred O2 sensor temperature. You have to build it your self which takes about 30 minutes if you are handy with a soldering iron. I have one which I use as a back-up. Its as accurate as the controllers that I use to back-up, for what that is worth. The SLC Free uses aluminum can electrolytic capacitors so don't expose it to a lot of heat.
142 guy is offline   Reply With Quote
Old 11-16-2017, 09:07 PM   #7
esmth
dirty swede
 
esmth's Avatar
 
Join Date: Jul 2016
Location: Massachusetts
Default

^I have the $85 SLC free and it works great
__________________
1991 244 LH2.4 m46 293k miles with B cam advanced 4*, 935 fuel & 146 ezk, pink injectors, 2.5" exhaust w/ magnaflow straight-through & some kaplhenke suspension goodies
esmth is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 01:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.